Sorry - this product is no longer available

Servo Control Troubleshooting

Servo Control Troubleshooting is self-paced DVD course with 8 video modules, 200 page workbook and answer key.
Availability: In stock

Servo Control Troubleshooting

This DVD training program is an intensive 8-part course on DC and AC servo control systems. After completing this fascinating program you will have the knowledge and understanding needed to competently Troubleshoot and Repair most servo drive problems. If you have robotic systems operating at your facility, you need this training program! 

This video training set comes with (8) 1/2 hour video segments, a 200 page workbook and answer guide. It is a complete 40 hour training program on all major servo control systems. Covers AC, DC and stepper servo drive systems.

Servo Control Training Part 1:

Part 1 begins with an introduction into servo control theory. Examine fundamental operating characteristics of open-loop and close-loop servo systems. Learn basic electrical principles like Ohm's law and power equations, series circuits and parallel circuits. Part 1 begins laying a solid foundation for mastering servo control troubleshooting techniques. 

Servo Control Training Part 2: 

Gain an in depth understanding of DC and 3-phase AC motor operation. Permanent magnet and brushless DC motor operations are covered in great detail. Also covered are stepper motors and 3-phase squirrel cage motors. Examine shunt, series, compound and separately excited DC servo connections. Part 2 also explains the operation of 3-phase current and how it effects the operation of both AC and DC motors. 

Servo Control Training Part 3: 

No servo training is complete without an in depth examination of semiconductor theory. Part 3 meets this vital need. Take an exciting journey into semiconductor theory. By the end of the day you'll understand how semiconductor devices actually work. They will examine diodes, bi-polar junction transistors, FET devices, MOSFET devices, SCR's, Triacs and more. Knowing how to troubleshoot and test these vital components is necessary for any servo control technician. 

Servo Control Training Part 4:

This segment of the servo training provides a close examination of common feedback devices used to monitor both speed and positioning of a moving axis. Learn how tach-generators function, resolver operation, incremental and absolute encoder operation, about inductosyn scales and linear variable differential transformer (LVDT) operating characteristics. Part 4 also explains how the main controller is able to monitor and control positioning of an axis. Learning how feedback devices function is vital to repairing downed equipment due to servo malfunctions. 

Servo Control Training Part 5: 

After completing the first four parts of the servo control training you are ready to begin an in depth study of DC control servo systems and techniques. Phase control, ramp control, PWM and frequency control techniques are all examined. Also covered in part 5 are mechanical, dynamic and regenerative braking techniques. Part 5 goes to the heart and soul of the DC servo control system. 

Servo Control Training Part 6: 

Gain an in depth understanding of AC drive theory and operation. They will examine voltage source inverters, voltage variable inverters and current source inverters. They will also examine phase, ramp, frequency, pulse width modulation, and chopper control inverter systems. They will see how the 3-phase electricity is converted into direct current, filtered and inverted back to a pulsating potential capable of running an AC motor. 

Servo Control Training Part 7: 

Part 7 continues the study of various servo drives with the examination of the brushless DC motor drive, stepper motor drive and vector motor drive. Part 7 also covers system integration, external connections, avoiding cabling problems, proper enclosures, common electrical problems and proper grounding techniques. 

Servo Control Training Part 8: 

The final training session is centered around troubleshooting techniques. Learn how to analyze servo faults, determine when drive adjustments are required, how to interpret fault indicators, examine common servo failures and learn how to handle them. Also learn safety procedures when working around any automated piece of equipment.

How do I order Servo Control Troubleshooting?

1. You can order online with a credit card or PayPal (click the 'Add to Cart' button). 

2. Call us at (800) 321-2155 and ask for course 01-862. 

3. You can mail a check or money order for $213.95 (includes $18.95 for shipping/handling) to:

CIE Bookstore 
1776 E. 17th Street 
Cleveland, Ohio 44114 
Attn: Servo Control Troubleshooting

4. You can fax your order to us at 216-781-0331.

Foreign shipping expense will be higher.

Order on-line or call (800) 321-2155 and ask for course 01-862 Servo Control Troubleshooting.

Customers who bought this item also bought

Communications and Opto-Electronics Lab

Learn Communications and Opto-Electronics with this hands-on deluxe training lab!

The PLC Trainer

The PLC Trainer is full of proven practical applications that allow the student to gain an understanding of the PLC's Instruction Set.

Troubleshoot Hydraulic Systems DVD Course

Learn how to troubleshoot hydraulic systems with this hydraulic training DVD course. Designed to teach you how to understand and troubleshoot hydraulic system failures.